Revere Ware 1801 Tea Kettle | Copper-Bottom Whistling Kettle
Our 1801 kettle represents over 85 years of American cookware heritage in a single, elegantly functional design. The stainless steel body holds 2.5 quarts and features our signature copper-clad bottom for rapid, even heat distribution across gas, electric, and induction cooktops.
The 1801’s defining feature is the thick copper disc permanently bonded to the stainless base. Copper conducts heat roughly five times faster than stainless steel alone, which means your water reaches temperature in less time and responds immediately when you adjust the burner.
Capacity & Dimensions
At 2.5 quarts, the 1801 strikes the ideal balance for most households. It holds enough water for six generous mugs of tea or a full French press carafe, yet it’s light enough to lift and pour with one hand even when full.
The kettle measures 8.5 inches in diameter at the base and stands 9 inches tall with the lid in place. The spout extends 3 inches from the body for controlled pouring, and the handle arc rises high enough to keep your hand well clear of steam. We’ve kept the footprint compact so it stores easily in standard cabinets or sits permanently on a back burner without crowding your stovetop workspace.
Whistle Mechanism & Spout Design
Automatic Whistle Alert
The 1801 uses a two-tone harmonic whistle that sounds clearly across the house when water boils. The whistle cap sits in the spout opening and vibrates with escaping steam, producing a sustained note rather than a shrill shriek. You can remove the whistle cap entirely if you prefer silent operation, though most customers appreciate the hands-free alert when multitasking in the kitchen.
Drip-Free Pour Spout
We’ve angled the spout at 22 degrees and finished the rim with a rolled edge that cuts off water flow cleanly. Even when you pour slowly for delicate tea leaves, the stream stays coherent without dribbling down the kettle’s side. The spout interior has no seams or crevices where mineral deposits can accumulate in hard-water areas.
What makes the 1801 distinctive
Classic Revere Ware Tea Kettles & Cookware
Customer reviews
Common Questions About the 1801 Kettle
Yes, the 1801 works on induction cooktops thanks to its stainless steel construction. The copper bottom is bonded to a magnetic stainless base layer that induction sensors recognize immediately. We’ve tested it on all major induction brands, and customers report consistent heating and reliable burner detection.
Wash the copper with warm soapy water after each use and dry thoroughly to prevent water spots. For deeper cleaning, apply a commercial copper polish cream with a soft cloth, rub gently in circular motions, then rinse and dry. If you prefer the natural patina look, simply skip the polish and let the copper age gracefully over time.
We back the 1801 with a limited lifetime warranty against defects in materials and workmanship. If the copper bottom separates, the stainless body develops leaks, or the whistle mechanism fails under normal household use, contact our customer service team for a replacement. The warranty does not cover cosmetic wear, accidental damage, or discoloration from improper cleaning.
The kettle is dishwasher-safe, but we recommend hand washing to preserve the copper’s shine and prevent water spots on the stainless finish. Dishwasher detergents can dull the copper over time and may leave mineral deposits in hard-water areas. A quick hand wash with dish soap takes less than a minute and keeps the kettle looking showroom-new.
On a gas or induction burner at medium-high heat, the 1801 brings 2.5 quarts of tap-temperature water to a rolling boil in approximately five to six minutes. Actual time varies with your stovetop’s BTU output and starting water temperature. The copper bottom transfers heat significantly faster than stainless-only kettles, cutting boil time by roughly 30 percent in side-by-side tests.
Yes, the whistle cap lifts off the spout by hand for thorough cleaning. Remove it once a month to rinse away any mineral buildup or tea residue. You can also leave the whistle off permanently if you prefer a silent kettle, though most customers appreciate the hands-free boiling alert when they’re working in another room.
The handle is molded from heat-resistant phenolic resin that stays cool to the touch even when the kettle boils for extended periods. Phenolic withstands temperatures up to 350 degrees Fahrenheit without softening or releasing odors. The handle attaches with stainless steel rivets that pass through the kettle body for maximum strength and stability during pouring.